Jewelry Collection with a display carton
Whether you’re going to organize a garage sale or just want to organize your room, you can make a display made of cardboard to keep your jewelry collection with an attractive view and avoid the chains are entangled with each other.
It is not something outrageously easy, but with the right materials, anyone can make this simple and elegant accessory. Organize your room and make sure all your parts are accessible to your needs immediately. If you use it for the sale of a garage, anyone can view the items and their price.
1.) Cut a rectangle 10 by 30 inches (25.4 to 76.2 centimeters) fiber. If you want to make a display of smaller cardboard, you can use any size. You do not have to choose a box, but this is the easiest way to start. With 10 inches (25.4 centimeters) tall, place the cardboard in front of you, measure 10 inches (25.4 centimeters) on each side and make him a mark on the top and bottom.
2.) Draw a line on the edge of a ruler or other object that is straight and heavy on items and press as hard as you can so that dent the top line down. Do it a second time, but this time fold the side towards the center. Fold the end toward the back and fold it once again at the top by applying pressure with a straight end. Once it is firmly secured in the back, start the other side.
3.) Cut a wider and longer than the size of the cardboard piece of fine velvet or felt 2 inches (5.08 centimeters). If you cut a piece 10 by 30 inches (25.4 to 76.2 centimeters) velvet size is 12 by 32 inches (30.48 by 81.28 cm). Pour 2 tablespoons white glue, like the brand “Elmer” in a saucer.
If thick, you need to mix a small amount of water to be slightly more watery. Use a brush to spread it on the face of one end of the cardboard pieces but leaves quarter-inch (0.63 cm) from the fold.
4.) Center the fabric so that 1 inch (2.54 cm) hang over the edge on all sides. Press the fabric on the face side of the carton with glue. Let dry completely by placing weight on it. Flipped down cardboard web. Fold so that the center is located in front of you and let the fabric fall aside. Put the glue mixture on the face, but do not do it on the folded seam. Press the fabric in place. Place books on top while it dries.
5.) Books withdraw and open the carton so that the cloth is placed on the bottom. Fold the last end toward the center, leaving the fabric to the side. Covering face with glue, making sure to leave 1/4 inch (0.64 centimeters) from the crease. Press the fabric in place. Place weight until dry.
6.) Open display merchandiser cardboard and put the fabric down. Fold the edge of the fabric inward to keep it in a flat position. In both folds, on top and bottom, cut a wide “V” with the tip end thereof in the carton.
Cut from the corner of the cloth so that the “V” forms a right angle with the sides even with the ends of the carton. Paste the upper and lower ends, then glue the sides in the back of the cardboard. Subsequently, the material overlaps at the corners.
7.) It uses a drill hole size extra large scope of quarter-inch (0.63 centimeters) to make 2 holes one inch apart for chain necklaces. In the back, you will stick on plastic or paper directly under the holes for fastening the chains push through the holes. If you need threebearsclothing , then the team of professionals from threebearsclothing is here to help you.
Make a narrow cut in the screen of the display cardboard jewelry meter rings, pins or the backs of earrings pressure. Pushing the hooks through the board to show pierced earrings. The sides provide space to display jewelry in this homemade jewelry merchandiser as well as the front.